Atal promote and use the most advanced materials available, with sustainability as our foremost aim. Our technical partners are independent manufacturers at the forefront of construction product technology, with proven ISO 9001 registered manufacturing systems.

This allows us to offer the latest technology with a comprehensive range of systems to provide bespoke solutions for each individual project requirements.


Atal systems and materials are fully standards and code compliant, and BBA certified where necessary to comply with BS8102, the Code of Practice for protection of below ground structures against water from the ground, NHBC Chapter 5.4, and BS 8485, the Code of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings.

Delivering value

At atal, we offer expert knowledge on structural waterproofing, and ground gas protection, our design philosophy is the selection of the most technically appropriate, value driven, cost effective solutions without compromising the relevant standards we must work to. 


All of our designs and specifications are written by our CSSW qualified technical team and are supported by our own PI insurance, ensuring all our designs comply with industry standards such as BS8102, BS8485, NHBC Chapter 5.4, Premier Chapter 6 and all other industry digests and standards.

Our technical partners are independent manufacturers with proven ISO 9001 registered manufacturing systems and products, allowing us to offer the latest technology and comprehensive range of systems to provide bespoke solutions for individual project requirements.


We offer the highest quality of service from taking design responsibility, to materials supply, training, on-site support and QA, installation by our own staff, through to our warranty provision, with the option of additional independent insurance backed cover provided by Allianz.


Our aim is to give peace of mind, in doing so we offer 3 grades of warranty protection packages. To ensure there are no grey areas, we take the design responsibility from architects and engineers, the materials are warrantied with options to warranty the installations and have independent insurance cover from Allianz

atal Structural Waterproofing provide:

  • A single company taking responsibility for waterproofing design, supply, installation and 10year warranty, extendable up to 25 years
  • Value Engineered Solutions
  • Dual Waterproofing Solutions recommended
  • Compatible Systems
  • On-site Training, QA, Installation and Support

Working closely with and promoting manufacturers with the same core values, similar outlook, and technical excellence ensure that we remain at the forefront of new technologies.

Key Technical Partners:  

NAUE has been part of the history of geosynthetics since the very beginning. The company’s trend-setting performance continues to influence developments today.

Founded in 1954, NAUE introduced in 1967 the first nonwoven filter material for use in hydraulic engineering applications.

In the field’s early years, the use of geosynthetic products was an absolute novelty. But NAUE tirelessly pushed the idea and raised awareness of geosynthetics in construction and engineering. This effort included lectures and seminars, involvement with professional congresses, and numerous trial applications to demonstrate the effectiveness, potential and ecological and economic benefits of these materials, those key benefits continue to be realized and recognized today.

NAUE is an EN ISO 9001 - certified company. Within its comprehensive range of geosynthetic products is the Bentofix® range, a BBA certified waterproofing system (Bentofix® BFG 5000 and X2 BFG 5300) the “Original” sodium bentonite system.


For the past 70 years SCHOMBURG has stood for the principles of Expertise, Waterproofing, and Construction, High quality building product systems are developed and produced, fuelled by a family oriented corporate culture of quality and environmental awareness. The way Schomburg interact is dominated by an awareness of quality and the environment, which is firmly embedded in the culture of the family business.

Product systems designed to provide reliable and high-performance results is the central focus of their daily thoughts. This has been the Schomburg company philosophy for the past three generations.

This is seen daily through the company’s success. Success only occurs when a company truly lives its culture and philosophy – and Schomburg place a high value on this.

As a result, it is not just the personal involvement of the Schomburg family members, but also the exemplary dedication of the employees, who identify themselves with the SCHOMBURG Group.

They are rightly very proud of this.

SCHOMBURG – your supplier of quality systems for reliable construction.


The customers that have been supplied with the admixture have been pleased and we have had no issues with strength or quality.

The change to the bags sizes(introduction of the water soluable bag) has made it easier especially for manually handling on the plant side.

- Kevin D'Souza - London Concrete

The atal service has been fantastic, the architect specified the types of waterproofing that we’d need. We had early design meetings with atal and the main contractor and from that point we’ve gone through the whole process from design to copmletion. They’ve been great.

- Simon Mann

Thankyou so much to atal for inviting me to todays meeting. I've learnt a whole lot about building physics, Type B Waterproofing and seen some really interesting case studies. The product looks absolutely fantastic and will do very well i'm sure of it!

- Adam Meyrick

I have worked with the guys at Atal for a number of years now whilst working for a number of companies & I would recommend them to other potential customers. I like their proactive approach, customer service, technical knowledge & speedy deliveries. 


If I ever have a problem or detail that needs resolving there is normally  someone available to help, even if it means them jumping in the car & visiting one of our sites at short notice!

- Richard Cleghorn MCIOB, P Chapman Construction

Great service on pricing enquiries for supply and Install, also repairing work - friendly and efficient staff.

- Simon Marsh

I would go with atal for waterproofing on any of my projects!

- Mike Mansfield, Intelle Construction

MJL Contractors Ltd have worked with Atal for a number of years now. We appreciate the professional & approachable manner offered by all of the staff at Atal & we know that if we have a problem we only have to pick up the phone & they will do their best to solve it. Prices are competitive & deliveries arrive as agreed.

- Richard Cleghorn MCIOB, MJL Group Limited

‘’Project architects, RDA liaised with Atal to bring forward a set of waterproofing and tanking details to ensure a water tight lower ground floor level within the setting of the original Bristol Evening Post print factory basement.  Atal provided us with design drawings and specifications founded on their product range and comprehensive industry experience, with which we were able to confidently develop our working drawing package.’’

- Rich Brown – Russ Drage Architects

‘’We had the fortune of being introduced to Atal via our main contractor. We were very pleased with the work they carried out. Although we had some challenges with some leaks with our new build Atal was able to identify the source of the problem very quickly and resolve it immediately. I would have no hesitation in recommending Atal.’’

- Prakash Patel – Hertz

‘’We have completed the groundworks package and almost completed the RC frame package at ‘’3 Glass Wharf’’ in Bristol on behalf of HMRC through Wates Construction. Throughout this project 4D Structures worked alongside Atal UK to ensure the waterproofing elements involved were installed to the highest standard. It was a pleasure working with Atal from design stage right through to the final sign off. They provide a brilliant service from design, supply of materials and also on site help and pre pour inspections. I would highly recommend them and look forward to working with them again in the near future.’

- Jordan Keyes – 4D Structures

‘’Atal have provided consistently quality products, on time at very competitive prices when compared to other high spec structural waterproofing brands. Customer Service has also been consistently, and the inclusion of detailed design documents tailored to specific projects goes above and beyond what other waterproofing companies are often willing to do. Overall, Atal have provided reliable, high quality products and customer service every time we have required their expertise’’ 

- Tom Luscombe – D Wall Construction Services

‘’We have been working with Dave and his team since the inception of the company and it is no surprise at all that the company continues to flourish. The services that Atal offers are unique and un-rivalled in the UK waterproofing industry, and it’s the reason why we as designers and our supply chain partners continue to use them. Keep up the good work Atal!’’

- Gavin Fairclough – Austin Partnership

“We always use Atal for their waterproofing expertise because of their technical ability to provide bespoke waterproofing design solutions tailored to our structural requirements in a proactive and efficient timescale”

- Matt Jones - Vale Consultancy

"Atal have a comprehensive product range, they always offer practical achievable solution and delivery on time results. David is very knowledgeable, and his positive approach is refreshing, hopefully we will continue to enjoy our mutually beneficial relationship, long into the future.”

- Simon Monk - McDermotts

Join Our Mailing List

Join our mailing list to be kept up to date with waterproofing techniques and emerging technologies.